Sustainability and Thermal Efficiency

Sustainability: COLORBOND® steel is durable and resilient to Australia’s harsh climate and its long life helps conserve resources and energy that may otherwise be invested in products with a shorter life span. All COLORBOND® steel contains recycled content and the steel itself in COLORBOND® steel is 100% recyclable. In some cases it can be reused without reprocessing, again saving on energy and resource use.

Five Layers of Protection

Fire Performance

When you purchase COLORBOND® steel you are buying products made and backed by BlueScope, one of Australia’s largest manufacturers. BlueScope offers a variety of warranties subject to application and eligibility criteria. You can apply for a warranty using our online Warranty Management System. To make things simpler, our warranty system provides the opportunity for specifiers, builders or installers to receive a pre-approved warranty if eligibility criteria are met. They can then give you the activation code in the pre-approved warranty and you then simply create an account in the system and activate your warranty with your unique activation code. Please ask your specifier, builder or installer if they can manage this for you.If you are concerned about a COLORBOND® steel product, please contact us. Our team is there to answer any questions you may have and if the issue cannot be resolved over the phone they may send out a Consumer Query Form to be filled out. Filling out, and sending back, the Consumer Query Form gives BlueScope the required information to begin assessing the matter and, if appropriate, one of our Warranty Claims Specialists may be sent out to undertake a site inspection.

Easy to Maintain

Simple maintenance of COLORBOND® steel by regular washing with clean, fresh water will not only prolong its life but also maintain its attractiveness for longer periods thus protecting your asset. Applications where the paint finish is naturally washed by rainwater do not usually require this maintenance, e.g. roofing. However, some areas such as wall cladding under eaves, the top of garage doors and the underside of eave gutters are often not washed by rainwater, and so require some attention.  Ensure these ‘unwashed’ areas are hosed down at least every six months and more frequently in coastal areas where marine salt spray is prevalent, and in areas where high levels of industrial fallout occur. It is also important to ensure that there is no build-up of debris, such as soil and mulch against COLORBOND® steel products. If cared for in this way, your building components made from COLORBOND® steel should give many years of easy maintenance life.

Make sure it’s genuine

Over fifty years of Australian research and development has created a range of technologies that give genuine COLORBOND® steel its long lasting performance when subjected to some of the harshest Australian conditions. You can make sure you’re getting the genuine article by looking out for the COLORBOND® steel branding on the product, or its packaging.For roofing and walling, check for the ink branding on the reverse side of the sheet. On fencing look for laser branding on either side of each panel; it appears at least three times in each 2.4 m section. For guttering, you can look on the inside for ink branding, and you will find the protective wrapping that your COLORBOND® steel arrives in, is branded too. Genuine COLORBOND® steel garage doors are ink branded. This is an edge brand on the reverse side of the sheeting with ‘COLORBOND® steel made by BlueScope’.Whatever you are building with COLORBOND® steel, be it a new home, a shed or a fence, it pays to check that you are getting what you’ve paid for and that the materials used are going to live up to the task – especially if they are protecting your investment from the Australian elements, which put all building materials to the toughest of tests.